Analyser Specification
Throughput
- Up to 240 tests/hr
- Up to 80 tests/hr (Freelite™)
- Incubation time: 10 minutes (Freelite™)
Reagent Module
- 24 reagent positions
- On-board reagent cooling (10 + 2°C)
- Dual reagent probes with automated washing between reagent addition
- Reagent level detection and reagent management
Sampling Module
- Sample Type: serum, plasma, urine
- 40 sample + 5 STAT position carousel: 30 primary tube with barcode reading
- Sample tubes accepted: disposable cups, 5mL, 7mL, 10mL
- Integrated Bar Code reader. Acceptable Bar Codes: Code 39, Code 128, ITF, NW-7. Reads up to 18 digits
- Sample volume: 6.5-15 µL, dead volume 150 µL
- Auto dilution capability
- Auto rerun capability
- Sample volume level detection
- Automated interior/exterior probe washing
Maintenance Service
- 1-year limited service warranty
- Minimal daily and monthly user maintenance
Reaction Module
- 60 semi-permanent plastic cuvettes
- 37°C + 0.1 reaction temperature
- Automatic 10-step, high temperature, cuvette washing system
- Dual-chamber, air pressure enhanced mixing
Optics Module
- Wavelength: 12 discrete
- Automated cell blank correction after cuvette washing
- Tungsten halogen lamp: ~2000 hours
- Silicon photo-diode detectors
Software
- Windows® XP-based
- LIS compatible (RS-232C bi-directional system interface)
- Levy-Jennings QC monitoring
- Water supply, wash solutions and waste level alarms
Physical Specifications
- Dimension: 31.5" (W) x 25.2" (D) x 20.5" (H)
- Weight: 210 lbs
- Power requirements: AC 115V 50/60 Hz
- Rated power consumption: 600 VA
- Water type: Deionised Water
- Acid and Alkali wash bottles 3L at the side of the instrument
- 10L DI water and 10L waste containers and 5L cuvette waste container below the instrument
SPAPLUS™ and Freelite™ are trademarks of The Binding Site, Birmingham, UK. Windows is a registered trademark of The Microsoft Corporation.
.jpg)